PZEM-008 Power Single Phase Energy Meter

The PZEM-008 Power Energy Meter is a versatile device designed to measure and monitor the power usage of your electrical appliances. With a wide input voltage range of 50-300V and a current measuring capacity of up to 100A, this energy meter is suitable for both residential and commercial applications.

Key Features:
Accurate measurement of voltage, current, power, energy, and frequency
Large LCD for easy reading of data
Compact and portable design for convenient installation
Multiple protection features to ensure safe operation

Function
Measure AC voltage, current, active power, energy, and display with LCD.
Display
I. Display interface
BTN wide viewing angle LCD: voltage + current + active power + energy + white backlight
Ⅱ. Display Instruction
1. Voltage
Measurement range: AC50~300V
Starting test voltage: 50V
Accuracy: ±1%
2. Current
Measurement range: 0~100A
Display format: Starting test current:0.02A
Accuracy: ±1%
3. Active Power
Measurement range: 0~30kW
Display format:≥10000W display such as:30.0kW
Starting test power:0.5W
Accuracy: ±1%
4. Energy
Measurement range: 0~1999kWh
Display format: Over the test, the range will maintain the data, otherwise you reset it.
Accuracy: ±1%
Other Function
1. Backlight control
The backlight can be turned on or off by pressing the key
2. Reset energy
Long press the key over 3 seconds until the energy data flash, then release the key, and short
Press the key again to reset the energy, otherwise after 3 seconds it will stop flashing and
the energy will not be reset.
3. Data Storage
When the power is off, the energy data and backlight status are saved.
4. Backlight control
Short press the key to turn the backlight on or off
5. Reset energy
Press and hold the key for more than 3 seconds until the energy data flashes, and then
Release the button and press the key briefly again to reset the energy
if not done swiftly, it will stop flashing after 3 seconds and the energy will not be reset

This product is suitable for indoor use only
The measured voltage and current should not exceed the rated values
The neutral wire for the single-phase supply should pass through the hole on the PZEM-008 Power Single Phase Energy Meter either from up or down.
Ensure that the wiring is done accurately

Package Include:
1 X Single-phase energy meter

Note: Installation Din rail channel iron is not included in the package. Din rail can be bought HERE