DC-DC Constant Voltage And Constant Current Boost Regulator Module

How to adjust output voltage and current
1. Adjust the “CV-ADJ” potentiometer to set the output voltage to the voltage value you need according to your load needs.
Voltage increase is the counterclockwise turn while voltage decrease is the clockwise turn
2. Turn the “CC-ADJ” potentiometer counterclockwise for about 30 turns, set the output current to the minimum, connect
the load, and adjust the “CC-ADJ” potentiometer to the current you need. For battery charging, after the battery is
discharged, connect it to the output, and adjust “CC-ADJ” to the current you need (when used for charging, be sure to use
a discharged battery to adjust it accurately, because the more power the battery has left, the smaller the charging
current) (the counterclockwise turn decreases the current and, the clockwise turn increases the current).
Please do not use a short circuit to adjust the current. The circuit structure of the boost module cannot be adjusted by a short circuit.
Scope of applications include but not limited to :
1. DIY a regulated power supply, if the input is 12V, the output can be adjusted from 12-50V.
2. Power your electronic equipment and set the output value according to your system voltage.
3. Use as a vehicle power supply to power your laptop, PDA, or various digital products.
4. Solar panel voltage stabilization.
5. Charge batteries, lithium batteries, etc.
6. Drive high-power LED lights.