DC 3V-6V to 400kV boost 400,000V boost power module high voltage generator

This high-voltage module is made using the Tesla coil principle and outputs high-voltage pulses and high-voltage currents. It is small in size, high in efficiency, and has simple peripheral circuits (just connect a switch and a battery).
Regarding power supply: You can use a single 3.7V lithium battery or two cells in series, such as an 18650 battery, an idle mobile phone battery (remove the protective plate, the recommended capacity is more than 2000mAh), or a nickel-cadmium/nickel-metal hydride battery pack, 4V or 6V lead-acid Batteries, etc.
This module is a finished module for small-scale use as a high-voltage inverter transformer/booster. After inputting DC3V-7.2V voltage at the input end, a DC high voltage of about 200,000 volts (about 1-2 cm arc) can be obtained at the output end.
Wiring: The red wire is the positive power supply. The output is 2 high-temperature and high-pressure resistant silicone wires
Red and green power supply connected to the red wire: “+” green wire “-”
Work: intermittent, continuous work is not allowed to exceed 1 minute and the output should not be short-circuited.
Incorrect voltage and long working time can easily damage the module

caution:
This high-voltage coil must be used by technically qualified persons. The power supply must be adjusted to the appropriate distance of the high-voltage output line, the battery capacity is proportional to the distance, and the use of a high-voltage arc without applying voltage as high as possible, must provide sufficient current. Experiment with short to long arc distance tests, do not exceed the maximum Arc distance power, and energy, can not be released due to high voltage, and it is easy to damage the module.

Package Included:
1 x DC 3V-6V to 400 kV boost 400,000V boost power module high voltage generator