2s 8A Lipo Lifelipo4 Battery Bms Board
Specifications
2 strings of lithium iron phosphate protection boards:
The parameters are as follows
Overcharge voltage range: 3.65v ±0.05v
Over-discharge voltage range: 2.0v±0.05v
Quiescent Current: Less than 30uA
Less than 30uA
Charging voltage: 7.2v~8.4v
Short circuit protection: Delay protection, self-recovery
Product Size: 41*16*3.5mm
Original price was: ₦2,300.00.₦2,000.00Current price is: ₦2,000.00.
Description
The main function:
Overcharge protection, over-discharge protection, short circuit protection, over-current protection
Wiring instructions:
B+ connects to the positive terminal of the battery
B- Connect to the negative terminal of the battery
MB is connected to the connection point between battery 1 and battery 2
P+ is connected to the positive electrode of the charging/discharging terminal (common to the charging and discharging terminals)
P- Connect to the negative electrode of the charging/discharging terminal (common to the charging and discharging terminals)
Warm reminder: When assembling the battery pack, the battery voltage, capacity, and internal resistance must be matched. The
battery voltage should be around the rated voltage of 3.7V. If there is no output after assembling the battery pack, use an 8.4V charger to charge the assembly to start.
Package contains
1 x 2s 8A lipo lifepo4 battery bms board